Let’s get started building a wing for our Comet Cub. Here’s a better look at that first rib. Can you figure out what I’ve done to it already, and what still needs to be done? This piece of balsa began its new life as part of a model airplane just a while back when I […]
Let’s work on that stick-and-tissue Piper Cub some more. Here are the fully assembled tail surfaces. No, they don’t come out of the box that way! You already know that because we left off last time with the bare beginnings of the horizontal tail laid out on the building board. There was a lot left […]
Last time we devoted a lot of attention to “plastic stuff”…windows and turrets. Those details are now in place and securely masked off, ready for painting (which is coming soon). Several series back I also mentioned getting some covering onto the control surfaces…elevator, rudder and ailerons…which are indeed the only “open” structure on a B-17. […]
Last time I showed you a pair of simulated-but-real-looking landing lights. Do you remember my discussion at the beginning of that installment about the ever-present need to weight the value of added detail against the value of the weight savings that doing without them offers? Those landing lights are a good example…I chose to include […]
The last time you saw Bob Benjamin’s Master’s Workshop it was part of FLY RC Magazine and this home page had a different look. As most of you probably know by now, FLY RC is gone. I spent the better part of a year working behind the scenes with the handful of creative people, writing […]
Converting the 30in Rubber Powered Dumas Piper J-4 to Electric RC…Extra Details and Flight Report I’m going to begin this flight report by catching up on some of the last-minute details I don’t want to miss telling you about, as well as by sharing a story about this airplane that might at first seem to […]
TOP FLITE Stinson SR-9 / Master’s Workshop Project Flight Report More than a few months (and a whole lot of dismal, gray winter weather) has passed since I shared with you the final Master’s Workshop column installment on building the Top Flite 100” span Stinson SR-9. It turns out that I have been involved with […]
Converting the 30in Rubber Powered Dumas Piper J-4 to Electric – Part 4 Before we actually get around to putting some covering on this model airplane, we need to talk about the process and materials I’m using…stuff many of you reading this may only have heard of, but never seen. So…I’m going to put on […]
Converting the 30 Rubber Powered Dumas Piper J-4 to Electric RC – Part 3 During our last session in the shop I finished building the basic structural components…wing panels, fuselage and tail surfaces…of the Dumas Piper J-4. This time we are going to fill in all those remaining details like mounting the motor, ESC , […]
Converting the 30 Rubber Powered Dumas Piper J-4 to Electric RC – Part 2 Last time I finished up with just enough work done on the fuselage to permit me to show you a trial mounting of one wing panel on the modified cabin assembly and the new 1/16″ plywood wing carry-through spar I designed for […]